Connect mode: Emergency
Info received
Disconnected
Connecting with E615
Connected
Receiving phone info
Getting phone info

Model: E615
Platform: LG Qualcomm
Software Platform: Android
SDRAM Size: 512 MB
NAND Flash Size: 3814 MB

CPU: MSM7225A
Connect mode: Emergency
Info received
Flashing firmware from C:/Users/Admin/Desktop/LGE615AT-00-V10d-ESA-YYY-SEP-11-2012+0.sbf

File reported model: E615
Checking Firmware File...
Checking Firmware File: OK
Checking Emergency Mode...
Mode: Emergency
Checking connect in Emergency Mode...
Checking connect in Emergency Mode: OK
Set Trust Mode...
Set Trust Mode: OK
Get DloadParams...
Get DloadParams: OK
Send Partition Table...
Send Partition Table: OK
Flashing Non-Bootable Partitions...
Flashing Partition: AMSS...
Initializing partition: 0x00000005 [AMSS]...
Initializing partition: 0x00000005 [AMSS]: OK
Writing Partition...
Flashing Partition: AMSS: OK
Flashing Partition: BOOT...
Initializing partition: 0x00000006 [BOOT]...
Initializing partition: 0x00000006 [BOOT]: OK
Writing Partition...
Flashing Partition: BOOT: OK
Flashing Partition: BOOT_LOGO...
Initializing partition: 0x0000001c [BOOT_LOGO]...
Initializing partition: 0x0000001c [BOOT_LOGO]: OK
Writing Partition...
Flashing Partition: BOOT_LOGO: OK
Flashing Partition: RECOVERY...
Initializing partition: 0x00000010 [RECOVERY]...
Initializing partition: 0x00000010 [RECOVERY]: OK
Writing Partition...
Flashing Partition: RECOVERY: OK
Flashing Partition: PERSIST...
Initializing partition: 0x00000019 [PERSIST]...
Initializing partition: 0x00000019 [PERSIST]: OK
Writing Partition...
Flashing Partition: PERSIST: OK
Flashing Partition: SYSTEM...
Initializing partition: 0x00000016 [SYSTEM]...
Initializing partition: 0x00000016 [SYSTEM]: OK
Writing Partition...
Flashing Partition: SYSTEM: OK
Flashing Non-Bootable Partitions: OK
Dload Finalization...
Dload Finalization: OK
Switching to normal mode...
Please power on the phone and wait some minutes to continue...
In some cases you should select the item "LG Software" in the dialog "USB connection" and reconnect USB-cable...